Description
1. WALK IN TYPE FUME HOOD WITH BLOWER
Overall Dimension L=1500mm, D=940mm, H=2100mm.
2. Design StructureAerodynamic, Floor mounted
3. Airflow typeAuto by pass type (for non AC labs)
4. Exterior Construction1.2 & 1.5 mm heavy duty electro galvanized CRCA (as per IS: 513) sheets with epoxy powder coating and rigid structure.
5. Interior ConstructionChemical and Heat resistant, Fire retardant, Smooth finish Trespa , Easily Cleanable Panels made out of durable material integral work walls, 6 mm thick.
6. Front Top Panel Easily open able hinged top panel for easy access to Flow control Valve and electrical lighting fixtures for maintenance.
7. WorktopChemical resistant slash and spillage proof dished ‘Jet black granite’ worktop (18 to 20 mm thick).
8. Sash (Shutter)Horizontal sliding sash. Toughened Float Glass sash for full work area visibility (5 mm thick). Smooth and light sash operation.
9. Lighting Fluorescent light (20 watt, 2 nos.) with vapour proof housing and fitting for proper illumination.
10. Electrical Utilities
3 Nos. of 5/15 amp electrical points shall be provided on the right side of the fume hood with tube light switch. Pushbutton starter and electrical connector shall be fixed on the top of the fume hood with all internal connections.
11. CENTRIFUGAL BLOWER 3000 CFM Chemical & heat resistant PP+FRP blower with aerodynamically balanced impeller, with drain plug. Conforming to fume hood face velocity as required. Electrical motor 3 HP, 110 V single phase TEFC, IP55, Class F, direct drive foot mounted motor will be provided.
12. DUCTING : (up to 5 Mtr Inclusive in Quoted Price )3650.00 R.MTR.
Ducting will be done on actual as per site measurement & billing will be done as per site measurement.
HDPE pipe of dia 200mm. (Per R.Mtr.) 1
HDPE bend of dia 200mm. (Per No.) 1
HDPE Flange of dia 200mm. (Per No.) 1
Rubber Gasket of dia 200 mm. (Per No.) 1
